HP / KW
|A||B||C||D||Pipe Size in inch||H||I||J X n|
|CD 1050 – TM/TB/TC||1.0 / 0.75||320||525||460||60||125||50||12.5||242||135||M10 x 8|
|CD 2050 – TM/TB/TC||2.0 / 1.5||320||650||440||65||125||50||12.5||205||135||M10 x 8|
|CD 3050 – TM/TB/TC||3.0 / 2.25||320||650||470||50||125||50||12.5||268||164||M10 x 8|
|CD 3050A – TM/TB/TC||3.0 / 2.25||400||650||470||50||300||80||12.5||268||164||M10 x 8|
|CD 5050A – TM/TB/TC||5.0 / 3.7||600||750||570||80||300||80||12.5||308||204||M12 x 8|
|CD 7050A – TM/TB/TC||7.5 / 5.5||700||800||650||80||300||80||12.5||348||244||M12 x 8|
|CD 10050A – TM/TB/TC||10 / 7.5||700||800||650||100||300||100||12.5||348||244||M12 x 8|
|Motor Power hp/kW||1/0.75||2 / 1.5||3 / 2.2||3 / 2.2||5.0 / 3.7||7.5 / 5.5||10 / 7.5|
|Motor Speed RPM||1440||1440||1440||1440||1440||1440||1440|
|Outlet Pipe Size mm||50||50||50||80||80||80||100|
|Inlet Pipe Size mm||125||125||125||250||250||250||300|
|Net Weight kgs||70||80||90||130||160||190||230|
|Gross weight kgs||100||110||120||170||200||240||280|
|Grinding chamber||:||FG 200 / GG 200|
|Hopper||:||FG 200 / GG 200|
|Teeth Ring||:||AISI : SS 440 C|
|Impeller||:||AISI : SS 440 C|
|Cutter Blades||:||Hardened Chrome Steel|
|Shaft||:||AISI : SS 431 Induction hardened|
|Mechanical seal||:||Carbon \ Ceramic|
Food waste disposers are designed for maximum energy efficiency and long lasting durabiIity with 3 different inlet sizes and 3 variant of mounting for any size operation.
Tabletop series crushers can be adopted to kitchen, and Working environment, without affecting existing layout.
TB SERIES (Tabletop – Batch):
In this series, crusher comes with cone and cover. It can be directly installed in the table or working area. Food waste is collected in the cone and It will be crushed in batches.The cover of the cone, is fitted with limit switch, when the lid is open the crusher shuts down. There are two or three flushing nipple arranged in the cone. When the crusher is started, water flush all the garbage in the cone to the crushing chamber. The cover prevents access to the rotating grinding unit during operation.
TC SERIES (Tabletop – Continuous):
In this series, crusher comes with cone and cover. It can be directly installed in the table or working area. Food waste is collected in the cone and it will be crushed continuously. The cover is fitted in such a way that it permits continuous feeding of garbage into the disposer. The opening of the crusher is partially covered and also supported with limit switch.
TM SERIES (Tabletop – Direct Mounting):
In this series, the sink is fitted with a 3″ or 4″ BSP nipple. A suitable plate, that comes along with the crusher is provided to fix the crusher with the sink directly (Sink is not part of standard accessories).